Step-by-step Installation Guide for Jeep 35 Inch Tires on Your Jeep Wrangler

by

Installing 35-inch tires on your Jeep Wrangler can enhance its off-road capabilities and give it a more aggressive look. This step-by-step guide will walk you through the installation process, ensuring you do it safely and effectively.

Tools and Materials Needed

  • 35-inch tires
  • Jack and jack stands
  • Tire iron or impact wrench
  • Torque wrench
  • Wheel chocks
  • Socket set
  • Brake cleaner
  • Air compressor (if needed)

Preparation Steps

Before you begin the installation, it is crucial to prepare your workspace and Jeep. Follow these steps:

  • Ensure your Jeep is parked on a flat, stable surface.
  • Engage the parking brake to prevent any movement.
  • Use wheel chocks on the opposite wheels to secure the vehicle.

Remove the Existing Tires

To install the new tires, you must first remove the existing ones. Here’s how:

  • Loosen the lug nuts on each wheel using a tire iron or impact wrench.
  • Lift the Jeep using a jack, then secure it with jack stands.
  • Remove the lug nuts completely and take off the old tires.

Install the New 35-Inch Tires

Now it’s time to install your new 35-inch tires. Follow these steps carefully:

  • Position the new tire onto the wheel hub.
  • Hand-tighten the lug nuts onto the wheel studs.
  • Lower the Jeep back down to the ground.
  • Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications.

Check for Clearance

After installing the new tires, it’s essential to check for clearance to avoid any rubbing during turns or over bumps:

  • Turn the steering wheel fully left and right to check for any contact.
  • Inspect the wheel wells for any signs of rubbing.
  • Consider adjusting the suspension if necessary.

Final Steps

Once you have installed the tires and checked for clearance, follow these final steps:

  • Recheck the torque on the lug nuts after driving a short distance.
  • Ensure the tire pressure is set to the recommended level.
  • Take your Jeep for a test drive to ensure everything feels right.

Conclusion

Installing 35-inch tires on your Jeep Wrangler can significantly enhance its performance and appearance. By following this step-by-step guide, you can ensure a successful installation while maintaining safety throughout the process.